schedule 80 steel pipe | ANSI Sch 80 table of dimensions and weights (2023)

ASME B36.10 is one way to find out what the schedule is for a steel pipe. This is shown by the letter "Sch" on the tube. Most steel pipes are used to move fluids and gases, so the inside diameter of the pipe is very important. One such program is Schedule 80 for steel tubes. Tubes with tube dimensions sch 80 are stronger than other tubes. Most often they are used when it is necessary to see the pipes. Compared to 40 gauge tubing, 80 gauge tubing is heavier. Sch 80 tubes are used in many different industries and are in high demand. Sch 80 tube dimensions in mm are more expensive than Sch 40 tubes because more material is used to produce them. Schedule 80 pipe is sized to withstand high pressures and high temperatures.
This is the best choice for the application using pipelines with high water pressure and high water temperature. The wall thickness of schedule 80 pipe is greater. This makes the tubes better able to handle higher PSI. In addition, they are considered perfect for chemical uses in the industry. Sch 80 1 inch tubes are approximately 0.179 inches thick and rated at 630 PSI. This number is greater than PSI and thickness sch 40.

Most Schedule 80 steel pipe suppliers offer these pipes in gray. The highest temperature these pipes can withstand is 140 degrees F. Not only do they have to handle high pressure, but corrosive chemicals as well. The thickness of schedule 80 pipes is measured in millimeters so that they can be used in indoor installations. Their diameters vary from 2 inches to 3 and a half inches. In continuous service, 2-inch gauge schedule 80 is rated at 920 PSI and is prone to burst when the temperature of the schedule 80 steel pipe dimensions exceeds 7340 PSI. Steel Tubes India is one of the largest manufacturers of 80mm steel tubes which we sell to a wide range of clients in various industries. We use inches and millimeters to measure and fabricate these sch 80 pipes. Amardeep Steel Center has a complete inventory of high quality carbon steel, alloy steel, and Schedule 80 stainless steel pipe.

(Video) HOW TO CALCULATE THE WEIGHT OF STEEL PIPE

Dimensions of Schedule 80 steel pipe in mm:

Nominal size [inches] Outside diameter [inch] Outside diameter [mm] Wall thickness [inches] Wall thickness [mm] Peso [lb/ft] Weight [kg/m]
1/8 inch 0.405 inches 10,3 MM 0.068 inches 1,73 mm 0.24 lbs/ft 0,37 kg/m
1/4 inch 0.540 inches 13,7mm 0.088 inches 2,24MM 0.42 lbs/ft 0,84 kg/m
1/2 inch 0.840 inches 21.3MM 0.109 inches 2,77 mm 0.85 lbs/ft 1,27 kg/m
3/4 inch 1,050 inches 26,7mm 0.113 inches 2,87 mm 1.13 lbs/ft 1,69 kg/m
1 inch 1.315 inches 33.4MM 0.133 inches 3,38MM 1.68 lbs/ft 2,50 kg/m
1 1/4 inches 1.660 inches 42,2MM 0.140 inches 3,56MM 2.27 lbs/ft 3,39 kg/m
1 1/2 inches 1900 inches 48.3MM 0.145 inches 3,68MM 2.72 lbs/ft 4,05 kg/m
2 inches 2.375 inches 60.3MM 0.154 inches 3,91MM 3.65 pounds/pa 5,44 kg/m
2 1/2 inches 2.875 inches 73,0MM 0.203 inches 5,16MM 5,79 lb/pa 8,63 kg/m
3 inches 3500 inches 88,9 MM 0.216 inches 5,49MM 7.58 lbs/ft 11,29 kg/m
3 1/2 inches 4000 inches 101,6MM 0.226 inches 5,74MM 9.11 lbs/ft 13,57 kg/m
4 inches 4500 inches 114.3MM 0.237 inches 6,02MM £10.79/piece 16,07 kg/m
5 inches 5.563 inches 141.3MM 0.258 inches 6,55MM 14.62 pounds/piece 21,77 kg/m
6 inches 6.625 inches 168.3MM 0.280 inches 7,11MM £18.97/piece 28,26 kg/m
8 inches 8.625 inches 219,1MM 0.322 inches 8,18MM £28.55/piece 42,55kg/m
10 inches 10.750 inches 273,0MM 0.365 inches 9,27 mm 40.48 lbs/ft 60,31 kg/m
12 inches 12.750 inches 323,8MM 0.406 inches 10,31MM 53.52 lbs/ft 79,73 kg/m
14 inches 14 inches 355,6MM 0.375 inches 11,13MM 54.57 lbs/ft 94,55 kg/m
16 inches 16 inches 406.4MM 0.500 inches 12,70MM 82.77 lbs/ft 123,30 kg/m
18 inches 18 inches 457,0MM 0.562 inches 14,27 mm 104.67 lbs/ft 155,80 kg/m
20 inches 20 inches 508,0MM 0.594 inches 15,09mm £123.11/piece 183,42 kg/m
24 inches 24 inches 610,0MM 0.688 inches 17,48mm 171.29 lb/per 255,41 kg/m
32 inches 32 inches 813,0MM 0.688 inches 17,48mm 230.08 lbs/ft 342,91 kg/m

SCH 80 Pipe Pressure Rating

Maximum Admissible Pressure(psi)(kPa)
NSP External diameter to schedule
(inches) (inches)
(mm)
10 20 30 summer schedule 40 60 XS 80 100 120 140 160 XXS
1/4 inch 0.54 inches
13.7
7985
55057
7985
55057
10798
74452
10798
74452
3/8 inch 0.675 inches
17.1
6606
45548
6606
45548
9147
63069
9147
63069
1/2 inch 0.84 inches
21.3
6358
43838
6358
43838
8575
59125
8575
59125
10908
75211
17150
118249
3/4 inch 1.05 inches
26,7
5273
36357
5273
36357
7187
49554
7187
49554
10220
70467
14373
99102
1 inch 1.315 inches
33.4
4956
34172
4956
34172
6670
45990
6670
45990
9316
64234
13340
91979
1 1/4 inches 1.66 inches
42.2
4133
28497
4133
28497
5638
38874
5638
38874
7380
50885
11276
77748
1 1/2 inches 1.9 inches
48.3
3739
25780
3739
25780
5158
35564
5158
35564
7247
49968
10316
71129
2 inches 2.375 inches
60,3
3177
21905
3177
21905
4498
31014
4498
31014
7097
48934
8995
62021
2 1/2 inches 2.875 inches
73
3460
23857
3460
23857
4704
32434
4704
32434
6391
44066
9408
64868
3 inches 3.5 inches
88,9
3024
20850
3024
20850
4200
28959
4200
28959
6132
42280
8400
57918
3 1/2 inches 4 inches
102
2769
19092
2769
19092
3896
26863
3896
26863
4 inches 4.5 inches
114
2581
17796
2581
17796
3670
25305
3670
25305
4769
32882
5782
39867
7339
50602
5 inches 5.563 inches
141
2273
15672
2273
15672
3303
22774
3303
22774
4404
30366
5505
37957
6606
45548
6 inches 6.625 inches
168
2071
14280
2071
14280
3195
22030
3195
22030
4157
28663
5318
36668
6390
44059
8 inches 8.625 inches
219
1420
9791
1574
10853
1829
12611
1829
12611
2307
15907
2841
19589
2841
19589
3375
23271
4085
28166
4613
31807
5147
35489
4971
34275
10 inches 10.75 inches
273
1140
7860
1399
9646
1664
11473
1664
11473
2279
15714
2279
15714
2708
18672
3277
22595
3847
26525
4558
31427
5128
35358
4558
31427
12 inches 12.75 inches
324
961
6626
1268
8743
1441
9936
1560
10756
2160
14893
1922
13252
2644
18230
3244
22367
3843
26497
4324
29814
5042
34765
3843
26497
14 inches 14 inches
356
875
6033
1092
7529
1313
9053
1313
9053
1533
10570
2079
14335
1750
12066
2625
18099
3283
22636
3829
26401
4375
30166
4921
33930
16 inches 16 inches
406
766
5282
956
6592
1148
7915
1148
7915
1531
10556
2009
13852
1531
10556
2585
17824
3157
21768
3733
25739
4404
30366
4882
33661
18 inches 18 inches
457
681
4695
849
5854
1192
8219
1021
7040
1530
10549
2042
14080
1361
9384
2553
17603
3147
21699
3743
25808
4252
29318
4848
33427
20 inches 20 inches
508
613
4227
919
6337
1225
8446
919
6337
1455
10032
1989
13714
1225
8446
2526
17417
3138
21637
3675
25339
4288
29566
4824
33261
22 inches 22 inches
559
557
3841
835
5757
1114
7681
835
5757
1949
13438
1114
7681
2506
17279
3063
21119
3619
24953
4176
28794
4733
32634
24 inches 24 inches
610
510
3516
766
5282
1147
7909
766
5282
1405
9687
1978
13638
1021
7040
2489
17162
3126
21554
3700
25512
4210
29028
4786
32999
30 inches 30 inches
762
510
3516
817
5633
1021
7040
613
4227
817
5633
32 inches 32 inches
813
478
3296
766
5282
957
6599
574
3958
1054
7267
34 inches 34 inches
864
450
3103
721
4971
901
6212
540
3723
992
6840
36 inches 36 inches
914
425
2930
681
4695
851
5868
510
3516
1021
7040
42 inches 42 inches
1067
583
4020
729
5026
438
3020
875
6033
Table 80 tube sizes
NSP 1/2 3/4 1 2 3 4
DN 15 20 25 32 40 50 Sixty-five 80 90 100
Benefits and Applications of Schedule 80 PVC Pipe

When it comes to high-pressure applications or areas with heavy vehicle or foot traffic, PVC Schedule 40 pipe may not cut it. That's where Schedule 80 PVC pipe comes in, providing the extra strength and durability needed for a variety of applications.

(Video) Pipe Schedule Chart | Pipe Class Explained | Pipe Schedule Explained

One of the key benefits of Schedule 80 PVC pipe is its high pressure rating. With pressure ratings ranging from 220 PSI to 850 PSI, it is a reliable alternative to Schedule 40 PVC pipe when higher pressure is required. This makes it ideal for use in commercial plumbing, chemical processing, factories, and agricultural irrigation.

Another benefit of Schedule 80 PVC pipe is its ability to withstand physical impact. In areas where the pipe may be exposed and subject to frequent traffic or activity, Schedule 80 PVC pipe can provide the extra strength and durability needed to prevent cracking or bursting. This makes it a popular choice for applications such as aquaculture and sewage pipes.

(Video) pipe weight using the Pipe Trades Pro

Additionally, Schedule 80 PVC pipe can be useful in more exposed areas where people or machines are likely to come into contact with the pipe. It can also be buried under pavement in heavy vehicle traffic, making it a durable option for applications in high-traffic areas.

Electricians can also benefit from using Schedule 80 PVC pipe in applications where Schedule 40 PVC pipe may not be strong enough. It can be used in any of the same locations as Schedule 40 PVC pipe (underground or coiled behind walls and ceilings) and can withstand three times the outdoor PSI of Schedule 40 PVC pipe.

(Video) pipe weight PDF chart in kg per meter/पाइप का वजन निकाले PDF चार्ट के जरिए

In conclusion, Schedule 80 PVC pipe offers a reliable and durable alternative to Schedule 40 PVC pipe in high-pressure applications or areas with heavy vehicle or foot traffic. Its applications are varied and include commercial plumbing, chemical processing, factories, agricultural irrigation, aquaculture, and sewer lines. Its ability to withstand physical shock and high external PSI also make it a popular choice for electricians.

Countries to which we export Schedule 80 A pipe

France, Azerbaijan, Korea, Hong Kong, Pakistan, Australia, Japan, Canada, Bangladesh, Netherlands, Argentina, Norway, Peru, Tunisia, Russia, Finland, Chile, Greece, United Arab Emirates, United Kingdom, Switzerland, Turkey, South Africa South, Costa Rica, Sri Lanka, Vietnam, Bhutan, Kenya, Yemen, Malaysia, Angola, Colombia, Romania, Afghanistan, Bolivia, Lebanon, Venezuela, Bahrain, Philippines, Hungary, Iran, Gabon, Czech Republic, Mexico, Lithuania, Kuwait , Ecuador, Brazil, Denmark, Spain, Indonesia, Estonia, Croatia, Morocco, Serbia, Ukraine, Algeria, Mongolia, Iran, Israel, United States, Sweden, Libya, Nigeria, Kazakhstan, Egypt, Austria, Singapore, Poland, Iraq, Taiwan, Belgium, Belarus, Slovakia, Oman, China, Qatar, Italy, Poland, Mexico, Jordan, Nigeria, New Zealand, Bulgaria, Portugal, Ghana, Trinidad and Tobago, Chile, Thailand

(Video) NCCER Basic Materials 34104 10 4_0 Structural Steel and Common Shapes

Cities we deliver 80 Pipe To Programming

Delhi, Solapur, Kanpur, Lucknow, Ahmedabad, Tirunelveli, Durgapur, Ujjain, West Bengal, Jharkhand, Patna, Benin, Buxar, Ballia, Hyderabad, Saharanpur, Vijayawada, Guntur, Ambattur, Puducherry, Varanasi, Vasai, Akola, India, Haora , Jhansi, Datia, Bihar, Chandigarh, Chennai, Jabalpur, Coimbatore, Mizoram, Haryana, Ludhiana, Ranchi, Nagda, Maharashtra, Calcutá, Manipur, Srinagar, Kurnool, Agra, Ambala, Bhavnagar, Uttar Pradesh, Tamil Nadu, Andhra Pradesh, Raipur, Kota, Udgir, Jamalpur, Karnataka, Waghala, Jamnagar, Ulhasnagar, Nagaur, Dhanbad, Suryapet, Jaipur, Faridabad, Nashik, Gulbarga, Sadar, Aurangabad, Tadepalligudem, Bikaner, Bombay, Miryalaguda, Pune, Kerala, Vadodara, Surat, Kalyani, Amritsar, Kalyan, Amravati, Jodhpur, Chhattisgarh, Allahabad, Gujarat, Rajkot, Mangalore, Banswara, Orissa, Nagapattinam, Gujarat, Dehradun, Bangalore, Nagpur, Bhadreswar, Meerut, Punjab

Videos

1. how to steel pipe || length weight detail || #shorts #trending #how ||
(fabrication & vlogs)
2. Pipe Spec for Chemical Process Engineers
(Jeferson Costa Chemical Process Engineer)
3. stainless steel pipe sizes,mild steel tubing sizes,steel pipe weld fittings,6 sch 40 pipe
(Worldsou HK)
4. Pipe Thickness Calculation for Piping Design ( With Calculation excel sheet)
(Pymedaca)
5. gi pipe class a b c difference | thickness of gi pipe | gi pipe color code | g i pipe weight
(Firefighting & Engineering)
6. how to check Steel pipe gauge , weight
(aluminium hut)

References

Top Articles
Latest Posts
Article information

Author: Neely Ledner

Last Updated: 06/15/2023

Views: 6005

Rating: 4.1 / 5 (62 voted)

Reviews: 85% of readers found this page helpful

Author information

Name: Neely Ledner

Birthday: 1998-06-09

Address: 443 Barrows Terrace, New Jodyberg, CO 57462-5329

Phone: +2433516856029

Job: Central Legal Facilitator

Hobby: Backpacking, Jogging, Magic, Driving, Macrame, Embroidery, Foraging

Introduction: My name is Neely Ledner, I am a bright, determined, beautiful, adventurous, adventurous, spotless, calm person who loves writing and wants to share my knowledge and understanding with you.